$154.99
Only 3 left in stock
This Steering Rack Tie Rod Assembly Kit is designed for the 2018-2021 Can-Am Maverick Trail 1000/DPS. It includes both the left inner and outer tie rod ends, making it an ideal solution for repairing the steering system without needing to replace the entire assembly.
| Weight | 2.50 lbs |
|---|---|
| Dimensions | 18.00 × 5.50 × 2.00 in |
| Make | Model | Engine | Year |
|---|---|---|---|
| Can-Am ATV / SxS | Maverick Trail 1000 | 976 | 2018 - 2019 |
| Can-Am ATV / SxS | Maverick Trail 1000 4X4 | 1000 | 2019 |
| Can-Am ATV / SxS | Maverick Trail 1000 4x4 | 976 | 2020 |
| Can-Am ATV / SxS | Maverick Trail 1000 4x4 DPS | 1000 | 2019 |
| Can-Am ATV / SxS | Maverick Trail 1000 4x4 DPS | 976 | 2020 |
| Can-Am ATV / SxS | Maverick Trail 1000 DPS | 976 | 2018 - 2019 |
| Can-Am ATV / SxS | Maverick Trail 800 | 799.9 | 2018 - 2020 |
| Can-Am ATV / SxS | Maverick Trail 800 4X4 | 800 | 2019 |
| Can-Am ATV / SxS | Maverick Trail 800 4x4 DPS | 800 | 2019 |
| Can-Am ATV / SxS | Maverick Trail 800 DPS | 799.9 | 2018 - 2020 |
Use this to plug your speedometer drive gear when removing the cable for installation of an aftermarket speedometer or computer. Since the drive contains the spacer, you’ll need to keep the drive installed or use very expensive custom aftermarket spacers. These inexpensive plugs will let you seal the grease in and dirt/water out using the OEM retaining screw. Simply install the same as you woul…
Reviews
There are no reviews yet.