DRC Edge2 Integrated Tail Light & Turn Signal LED Upgrade Processor Board - Yamaha WR250R/X

Yamaha WR250R/X

• Brake light color: Red
• Bulb Shape Code: C5W
• Connectors: Universal wiring with splice/bullet crimp connector options
• Light fitment: For the DRC Edge2 Taillight (sold separately)
• Light output: 560,000 mcd
• Lighting Technology: LED
• Power consumption: Less than 5 watts at full brightness
• Signal color: Amber
• Suitable For: Tail Light, Turn Signal Light
• Tail light color: Red
• Technology: LED
• Type: Display Lights
• Voltage: 12 V

For Yamaha WR250R/X models with the DRC EDGE 2 tail light.

Important note for LED lighting: LED flashers have very low consumption and the stock flasher relay may not work properly. The most frequent problem is that the LED may flash at a quick rate using stock flasher relays. There are many factors that would cause LED lighting to flash quickly. Some LED lighting may work just the same as the stock lighting. If a resistor is needed please contact us to get the correct relay.

This unit gives programmable integrated turn signals to the Edge / Edge2 tail light, as well as safety brake pulsing, a drop in replacement for the OEM led board, the unit also has brighter led's than the stock edge2 board, and is designed with 500,000 life hour capacitors for exceptionally long life operation.

The upgrade board is designed to replace DC voltage tail lights (most are DC). If your tail light operates from AC voltage, you can move your tail light supply wires to be feed after the regulator / rectifier on your motorcycle, or add any aftermarket voltage regulator / rectifier. Note: If you order this with an Edge2 tail light, select your OEM connectors here, and do not select any with the Edge2 tail light. New in version 1.2; even brighter LED light output, and more selectable turn signal patterns.