Flo Shroud Air Filter - For 10+ YZ450F, 14+ YZ250F, 15+ WR250, & 16+ WR450

For 10+ YZ450F, 14+ YZ250F, 15+ WR250, & 16+ WR450

• Material: Foam
• Type: Air Filter

Add these pre-filters to the intake ducts on your new-gen YZF or WR and solve the issue of inconvenient air filter access! These will keep your air filter cleaner for longer and are much easier to remove and clean than the main airbox filter.

Directions:

1. For most conditions and to prevent clogging, we recommend only oiling the portion of the Shroud Filters™ that is pushed into the shroud. Very little oil is required. Experiment what works the best for your conditions and cleaning convenience: i.e.. Using very little foam air filter oil; using a very light and easy to clean oil such as WD40 or Silicone spray; or simply running the Shroud Filters™ dry.
2. Install the Shroud Filters™ into each intake duct on the radiator shrouds by simply pushing the larger portion into place.
3. The square portion of the Shroud Filter™ will stick out creating a larger filter surface.
4. The installed Shroud Filter™ is mostly out of sight, but can be easily pulled out to clean. Depending on riding conditions, most of the time only the Shroud Filters™ require cleaning